Technical Data:
Wire Saw for quarrying of granite and sandstone
| APPLICATIONS |
Art No |
Specification (mm) |
Beads/M |
Reinforcement |
| To be widely used for granite quarrying, and block trimming in the mine |
ROC-GQ40R |
¢11.5×6.5 |
40 |
Rubber |
| ROC-GQ37R |
¢11.5×6.5 |
37 |
Rubber |
| ROC-GB40R |
¢11.0×6.5 |
40 |
Rubber |
| ROC-GB37R |
¢11.0×6.5 |
37 |
Rubber |
| Cutting Material |
Linear Speed (M/S) |
Cutting Speed (M2/H) |
Cutting Life
(M2/M) |
| Soft Granite |
28-40 |
12-20 |
30-45 |
| Medium Granite |
28-35 |
8-15 |
20-30 |
| Hard Granite |
24-32 |
4-9 |
10-20 |
| Abrasive Granite |
28-40 |
10-15 |
25-35 |
| SPECIFICATION OF BEADS |
Out Diameter |
Length of work layer (mm) |
Bead Length |
Manufacture Tech |
| ¢11.5 |
6.5 |
11 |
Sintered |
| ¢11.0 |
6.5 |
11 |
Sintered |
With the same above diamond wire we currently supply in different quarries, have achieved consistent performance and a balance of wire life to suit the customers' requirement at the best cost per square meter.
1. Soft Granite Class I-II (Abrasive/ Non-abrasive) - Quarry cutting: Achieving 10 to 15 square meters per hour and 32-35 square meters per linear meter of wire life on 37 or 55kw Variable Speed Quarry Wire Saw Machines.
2. Medium hard Granite Class III-IV(abrasive) - Quarry cutting: Achieving 8 to 12 square meters per hour and 22-25square meters per linear meter of wire life on 55 or 75kw Variable Speed Quarry Wire Saw Machines.
3. Hard Granite Class V (Very Abrasive) - Quarry cutting: Achieving: 8 square meters per hour and 14-16 square meters per linear meter of wire on 55 or 75kw Variable Speed Quarry Wire Saw Machines.
All our diamond wires are produced with highest quality of raw materials, a robust manufacturing process and severe quality control to ensure flawless reliability of performance. High level equipment is used to ensure a perfect injection process.